迷你偏摆测量仪

主要用于精密轴类零件径向跳动误差，用两顶尖定位轴类零件，转动被测零件，测针探测在零件圆柱面上，直接读取杠杆表径跳动误差。

Mini-pendulum measuring instrument

It is mainly used for radial run-out error of precision axle parts. Two pins are used to locate axle parts, rotate the measured parts, and probe the cylindrical surface of the parts. The run-out error of lever gauge diameter is read directly.

特点：

1、 采用精密钢制顶尖， 可选配钨钢顶尖，耐磨。

2、 配备高精度表座，可以精密微调，保证测量精度。

3、顶尖座及导轨面采用球墨铸铁，耐磨，不易变形。

4、滑座采用快速锁紧（已申请专利），双方向位置锁紧重复定位精度≤0.002。

5、可选配表座滑台带导轨螺杆移动型，适合多截面快速测量。

Characteristic:

1. Precision steel apex is adopted. Tungsten steel apex can be selected for wear resistance.

2. Equipped with a high-precision table, it can be fine-tuned precisely to ensure the measurement accuracy.

3. Nodular cast iron is used for the top seat and guide rail surface, which is wear-resistant and not easy to deform.

4. The slider adopts fast locking (patented), and the repetitive positioning accuracy of two-way position locking is less than 0.002.

5. Optional sliding table with guide rail screw movable type, suitable for multi-section rapid measurement.

迷你偏摆测量仪

偏摆测量仪主要用于检测轴类、盘类零件的径向、圆跳动和端面跳动。同时对具有中心孔的带轴内外啮合圆柱齿轮、圆锥齿轮、蜗轮和蜗杆的齿圈径向跳动和端面跳动进行测定（如果被测齿不带轴，可订制具有中心孔的芯轴），也可对其有中心孔的圆柱和圆锥的径向跳动和端面跳动进行测定。

Mini-pendulum measuring instrument

The pendulum measuring instrument is mainly used to detect radial, circular and end run-out of shaft and disk parts. At the same time, the radial run-out and end run-out of ring teeth of cylindrical gears, bevel gears, worm gears and worm with inner and outer engagement with central hole are measured (if the measured teeth do not have a shaft, the core shaft with central hole can be customized), and the radial run-out and end run-out of cylinder and cone with central hole can also be measured.